Official Portal
Science & Technology Research Institute For Defence
MINISTRY OF DEFENCE MALAYSIA
Cable Tensile Machine
Measure the strength of materials (wire rope, steel cable, metal chain and others up to 300kN.
Ballistic Test of Personal Ballistic Protective Equipment Samples ( Personal Ballistic Protective Equipment or PBPE) based on International Ballistic Industry Standards
Tests to determine if the sample complies with established international ballistics industry standards.
Such as:-
- Bulletproof Shirt
- Bulletproof Hat
- Eyeglasses
Ballistic Impact Tests on Various Types of Consumer Products
Tests to determine Ballistic Effects on Various Types of Consumer Products as follows:-
- Bulletproof Mirrors
- Bulletproof Panels
- CNG Tanks
- Fire Extinguisher Products
Immersion Test of Bulletproof Material Samples
This test is carried out to determine that the sample does not experience cracks on the outer surface.
V50 Ballistic Limit Test on Bulletproof Materials
Measures the ballistic performance of armor based on the projectile's kinetic energy.
Accuracy Measurement Test ( Shot Dispersions ) for Weapons and Ammunition
Tests carried out to measure and obtain accuracy of fire on target for weapons and ammunition.
2D Doppler Radar equipment
Projal velocity measurement for all types of guns, rockets, and missiles from small to large calibers.
Meteorological Station equipment
Observation of Meteorological Data at the Firing Site.
Measurement of environmental data such as:-
- Ambient Temperature
- Air Humidity
- Atmospheric Pressure
- Wind Speed
- Wind Direction
Stab Resistance Test for Bulletproof Material Samples according to NIJ Standard 0115.00
Measurement of the resistance of bulletproof material to the threat of knife stabs and Spikes up to Level 3.
Shot Recording in Full Frame and High Definition format
The activity recording service during the firing test is carried out using a Full HD high resolution camera .
600 Meter Covered Range Rental Facility Complete with Full HD Camera Facility to Record Shooting Tests and 2D Doppler Radar to Record Projectile Velocity up to 12.7mm Caliber
The Ballistics Branch is responsible for the 600 meter indoor range located in Batu Arang's STRIDE Weapons Technology Division. This field can be rented along with other facilities at a very reasonable price.
Sound Level Test
The tool is used to test the noise level during the firing test.
Cyclic Chamber (Salt Spray Test) – MIL STD 810G/Others
The salt spray test is an accelerated corrosion test that produces a corrosive attack on a coated sample ( coating ) to evaluate (mostly relative) the suitability of the coating to the sample/product.
Sensitivity of Explosives due to Impact Test – MS 1990-2-4:2009
Test or evaluate the level of sensitivity of the explosive sample to the impact of the weight. Evaluation is carried out based on the lowest impact energy ( Limiting Impact Energy , LIE) of explosives.
Thermogravimetric Analyzer (TGA)
Thermal characterization of high-energy materials by TGA.
Differential Scanning Calorimeter (DSC)
Thermal characterization of high-energy materials by DSC.
Fourier Transform Infrared Spectroscopy (FTIR)
Qualitative analysis of high-energy materials by FTIR.
High Pressure Bomb Calorimeter
Measurement of the heat of combustion of high-energy materials by a high-pressure bomb calorimeter.
Karl Fischer Titrator
Measurement of moisture content in high-energy materials by volumetric Karl Fischer titrator.
Ultra-High Performance Liquid Chromatography (UHPLC)
Chemical stability test of nitrocellulose- based propellants based on the reduction of stabilizers by UHPLC.
Gun Barrel Bore Gauge (EMEI Armament BA005)
Measure the diameter inside the gun barrel. The adjustable diameters that can be measured are 155mm, 105mm, 90mm, 57mm, 40mm and 35mm.
Video Image Scoping
Inspection and measurement to measure the size or depth of defects such as cracks found during inspection. The images obtained are clear and high-resolution even in a limited space through bright laser diode light sources and the latest image processing technology.
Fastec High Speed Motion Analysis (5,000fps)
Record slow motion for fast objects up to 5,000fps.
Photron High Speed Motion Analysis (250,000fps)
Record slow motion for fast objects up to 250,000fps.
Infra Red Temperature Thermo Graphic Test
Record temperatures to detect heat patterns in the infrared wavelength spectrum that cannot be seen with the naked eye. The temperature that can be recorded is from -20°C to 1000°C.
Precision Measurement Test
Measure objects using Coordinate Measuring Machine (3D CMM) equipment.
Test firing
Test firing to test the capability and functionality of the weapon.
Projectile Rocket Ordnance Design & Analysis System
Software to produce rocket or projectile models, measure mass properties, calculate aerodynamics and stability for simulated firing tests.
Firearm Physical and Dimension Examination
Physical examination and dimensional measurement of small arms as follows:
Safety Storage Box and Strong Room
Provide facilities for storing small arms.
Cable Tensile Machine
Measure the strength of materials (wire rope, steel cable, metal chain and others up to 300kN.
Ballistic Test of Personal Ballistic Protective Equipment Samples ( Personal Ballistic Protective Equipment or PBPE) based on International Ballistic Industry Standards
Tests to determine if the sample complies with established international ballistics industry standards.
Such as:-
- Bulletproof Shirt
- Bulletproof Hat
- Eyeglasses
Ballistic Impact Tests on Various Types of Consumer Products
Tests to determine Ballistic Effects on Various Types of Consumer Products as follows:-
- Bulletproof Mirrors
- Bulletproof Panels
- CNG Tanks
- Fire Extinguisher Products
Immersion Test of Bulletproof Material Samples
This test is carried out to determine that the sample does not experience cracks on the outer surface.
V50 Ballistic Limit Test on Bulletproof Materials
Measures the ballistic performance of armor based on the projectile's kinetic energy.
Accuracy Measurement Test ( Shot Dispersions ) for Weapons and Ammunition
Tests carried out to measure and obtain accuracy of fire on target for weapons and ammunition.
2D Doppler Radar equipment
Projal velocity measurement for all types of guns, rockets, and missiles from small to large calibers.
Meteorological Station equipment
Observation of Meteorological Data at the Firing Site.
Measurement of environmental data such as:-
- Ambient Temperature
- Air Humidity
- Atmospheric Pressure
- Wind Speed
- Wind Direction
Stab Resistance Test for Bulletproof Material Samples according to NIJ Standard 0115.00
Measurement of the resistance of bulletproof material to the threat of knife stabs and Spikes up to Level 3.
Shot Recording in Full Frame and High Definition format
The activity recording service during the firing test is carried out using a Full HD high resolution camera .
600 Meter Covered Range Rental Facility Complete with Full HD Camera Facility to Record Shooting Tests and 2D Doppler Radar to Record Projectile Velocity up to 12.7mm Caliber
The Ballistics Branch is responsible for the 600 meter indoor range located in Batu Arang's STRIDE Weapons Technology Division. This field can be rented along with other facilities at a very reasonable price.
Sound Level Test
The tool is used to test the noise level during the firing test.
Cyclic Chamber (Salt Spray Test) – MIL STD 810G/Others
The salt spray test is an accelerated corrosion test that produces a corrosive attack on a coated sample ( coating ) to evaluate (mostly relative) the suitability of the coating to the sample/product.
Sensitivity of Explosives due to Impact Test – MS 1990-2-4:2009
Test or evaluate the level of sensitivity of the explosive sample to the impact of the weight. Evaluation is carried out based on the lowest impact energy ( Limiting Impact Energy , LIE) of explosives.
Thermogravimetric Analyzer (TGA)
Thermal characterization of high-energy materials by TGA.
Differential Scanning Calorimeter (DSC)
Thermal characterization of high-energy materials by DSC.
Fourier Transform Infrared Spectroscopy (FTIR)
Qualitative analysis of high-energy materials by FTIR.
High Pressure Bomb Calorimeter
Measurement of the heat of combustion of high-energy materials by a high-pressure bomb calorimeter.
Karl Fischer Titrator
Measurement of moisture content in high-energy materials by volumetric Karl Fischer titrator.
Ultra-High Performance Liquid Chromatography (UHPLC)
Chemical stability test of nitrocellulose- based propellants based on the reduction of stabilizers by UHPLC.
Gun Barrel Bore Gauge (EMEI Armament BA005)
Measure the diameter inside the gun barrel. The adjustable diameters that can be measured are 155mm, 105mm, 90mm, 57mm, 40mm and 35mm.
Video Image Scoping
Inspection and measurement to measure the size or depth of defects such as cracks found during inspection. The images obtained are clear and high-resolution even in a limited space through bright laser diode light sources and the latest image processing technology.
Fastec High Speed Motion Analysis (5,000fps)
Record slow motion for fast objects up to 5,000fps.
Photron High Speed Motion Analysis (250,000fps)
Record slow motion for fast objects up to 250,000fps.
Infra Red Temperature Thermo Graphic Test
Record temperatures to detect heat patterns in the infrared wavelength spectrum that cannot be seen with the naked eye. The temperature that can be recorded is from -20°C to 1000°C.
Precision Measurement Test
Measure objects using Coordinate Measuring Machine (3D CMM) equipment.
Test firing
Test firing to test the capability and functionality of the weapon.
Projectile Rocket Ordnance Design & Analysis System
Software to produce rocket or projectile models, measure mass properties, calculate aerodynamics and stability for simulated firing tests.
Firearm Physical and Dimension Examination
Physical examination and dimensional measurement of small arms as follows:
Safety Storage Box and Strong Room
Provide facilities for storing small arms.
For more detailed information, please contact:
Mr. Mohamed Razman Bin Deraman
Phone: 603-6035 2121
Total views : 32619